Online Sim Racing netKar PRO


    Correct AIM shift lights for FTarget

    Share

    Fernando Zart
    Driver
    Driver

    Posts : 94
    Join date : 2010-11-06
    Age : 48
    Location : Brasil

    Correct AIM shift lights for FTarget

    Post by Fernando Zart on Sat Feb 12, 2011 10:18 pm

    Guys, I thought that that someone may be interested in getting the correct rpm shift lights for Ftarget, so here is what I've done:
    Edit the "..\nkpro\cars\FTarget\setup\aim.ini" file and change the RPM*= lines to:
    [AIM]
    RPM1=6400
    RPM2=6500
    RPM3=6600
    RPM4=6700
    RPM5=6800

    Enjoy. (Too bad no one drives Ftarget nowadays)

    René Lorig
    Driver
    Driver

    Posts : 297
    Join date : 2010-04-22
    Age : 22
    Location : Braunschweig, Germany

    Re: Correct AIM shift lights for FTarget

    Post by René Lorig on Sat Feb 12, 2011 10:31 pm

    I've set the last one to 7000.
    At the F2000, you can change it up to 6900 and gain more power. (As I did that back in 1.1 days I could gain almost 2 seconds on my PBs)

    Fernando Zart
    Driver
    Driver

    Posts : 94
    Join date : 2010-11-06
    Age : 48
    Location : Brasil

    Re: Correct AIM shift lights for FTarget

    Post by Fernando Zart on Sat Feb 12, 2011 11:55 pm

    You're right, it can be pushed a little further, but for long races I choose not to risk the engine and so I change gears a split second before red line. (I think that netKar simulates engine weathering during long races?).
    Anyway, excelent tip. I wonder if other cars should have their AIM "optimized" like this; it seems that original values were just throwed in without much testing.
    I was just joking around with vintage, and it can be optimized too...

    EDIT: Apparently, vintage has the AIM hardcoded, because changing the aim.ini file doesn't produce any effect. It's a shame that it doesn't have a manual clutch too.


    Last edited by Fernando Zart on Sun Feb 13, 2011 3:54 pm; edited 1 time in total

    M Carey
    Driver
    Driver

    Posts : 1076
    Join date : 2010-04-20

    Re: Correct AIM shift lights for FTarget

    Post by M Carey on Sun Feb 13, 2011 4:24 am

    I don't think nKPro simulates engine wear, but you can damage your engine by over-revving (easily done in the Abarth).

    Sponsored content

    Re: Correct AIM shift lights for FTarget

    Post by Sponsored content Today at 12:11 pm


      Current date/time is Tue Jan 24, 2017 12:11 pm