Online Sim Racing netKar PRO


    Camber values at the bottom of the screen

    Share
    avatar
    .....
    Driver
    Driver

    Posts : 96
    Join date : 2010-11-17
    Age : 28
    Location : Canada

    Camber values at the bottom of the screen

    Post by ..... on Sat Dec 18, 2010 6:57 pm

    Why are the camber values that show at the bottom of the screen different than the values entered? Are those the dynamic camber values? Thanks.
    avatar
    Gianluca Bonifacio
    Driver
    Driver

    Posts : 678
    Join date : 2009-06-29
    Age : 35

    Re: Camber values at the bottom of the screen

    Post by Gianluca Bonifacio on Sat Dec 18, 2010 8:39 pm

    yes, the camber shown at the bottom is the REAL camber value used at that moment...


    _________________
    avatar
    .....
    Driver
    Driver

    Posts : 96
    Join date : 2010-11-17
    Age : 28
    Location : Canada

    Re: Camber values at the bottom of the screen

    Post by ..... on Sat Dec 18, 2010 8:41 pm

    o.k...cool. thanks. Do you try to get the RF and LF the same and the RR and LR the same?

    M Waechter
    Driver
    Driver

    Posts : 755
    Join date : 2010-08-16
    Location : Germany

    Re: Camber values at the bottom of the screen

    Post by M Waechter on Sat Dec 18, 2010 8:56 pm

    I think they are plain even if they show different values. Those differences show up, because the track-surface -even the surface in box in some cases- the car is currently standing on are not always 100% plain.
    That's the reason why some values aren't equal left and right sometimes.
    avatar
    Gianluca Bonifacio
    Driver
    Driver

    Posts : 678
    Join date : 2009-06-29
    Age : 35

    Re: Camber values at the bottom of the screen

    Post by Gianluca Bonifacio on Sat Dec 18, 2010 8:58 pm

    in some circuits the box is not perfectly flat and there is the possibility that the values are not equal. is obviously preferable to maintain the same camber on the right and left, oval circuits apart.
    if you want to have a baseline setups, i can recommend you that are in the MDCBox tool. Razz
    EDIT: i arrived late! Very Happy


    _________________

    Sponsored content

    Re: Camber values at the bottom of the screen

    Post by Sponsored content


      Current date/time is Wed May 24, 2017 10:56 am