by Sorry to be a pain, but does anyone know of any tutorials for fixing them, preferably with 3ds Max 2010 (although the version isn‘t that important)?
Track holes
View the profile
Andrea Lojelo- Posts: 10103
Join date: 2009-04-26
Age: 33
Location: Den Haag
which kind of holes are you speaking about?
1)holes in a track due to wrong naming convention used for the object. For example if it's mispelled. valid: 01Road01. not valid: 01road01 or 01ROAD01. When you will go with you car on those object you will fall into a hole (you will start flying
or you will be sent straight to the box)
2) disallignment between surfaces that creates a visible hole in the track.
I'm not the right person to reply to this, but as far as I know you can edit the vertex of your object and using the magnet icon you can position them on a vertex of another object. in this way you can close the hole.
I hope some of the more expert 3d modelers could help you on this.
1)holes in a track due to wrong naming convention used for the object. For example if it's mispelled. valid: 01Road01. not valid: 01road01 or 01ROAD01. When you will go with you car on those object you will fall into a hole (you will start flying
or you will be sent straight to the box)2) disallignment between surfaces that creates a visible hole in the track.
I'm not the right person to reply to this, but as far as I know you can edit the vertex of your object and using the magnet icon you can position them on a vertex of another object. in this way you can close the hole.
I hope some of the more expert 3d modelers could help you on this.
Last edited by Andrea Lojelo on Tue May 11, 2010 7:57 am; edited 3 times in total
_________________
Mauro Delegà- Posts: 2178
Join date: 2009-06-08
Age: 56
Location: Verona
Il mio inglese non mi permette di aiutarlo purtroppo.
Cosa vuol sapere esattamente?
Cosa vuol sapere esattamente?
_________________
Andrea Lojelo- Posts: 10103
Join date: 2009-04-26
Age: 33
Location: Den Haag
come si mettono a posto i buchi. credo che il problema sia su un disallineamento tra due superfici. come le unisci?
_________________
Mauro Delegà- Posts: 2178
Join date: 2009-06-08
Age: 56
Location: Verona
Con lo snap ai vertici.
_________________
Andrea Lojelo- Posts: 10103
Join date: 2009-04-26
Age: 33
Location: Den Haag
try to have a look here: welding vertices using Snap Toggle
_________________
M Carey- Posts: 1038
Join date: 2010-04-20
Thanks for the responses, I tried the instructions at the bottom of the link, and it seems to fix some of the holes (the problem’s the latter by the way) but not the big ones in terms of length and width.
Here are some screenshots:
This is a gap where it worked.
This is a gap where it didn’t.
As you can see
Here are some screenshots:
This is a gap where it worked.
This is a gap where it didn’t.
As you can see
» Linearita' Volante...
» 24 May 2012: Zandvoort
» 17 May 2012: Sepang
» Best free anti virus software?
» netKar PRO v1.3.0.1 RSR update
» Crash on opening ingame server browser
» new PC title in development at Kunos Simulazioni: Assetto Corsa
» Open Wheel Series Skin Pack